Thanks to Max from Russia for sending in his Nissan 350Z Roadster (Z33) on WORK Schwert SC4 in Black Polish (BP) Finish. Sizing is a 19×9.0 +25 (effective +20 with spacer) F & 19×10.5 -13 R. In addition to this, he also owns a Subaru Outback on WORK Wheels as well.

(Source: 350ZClub)

Thanks to Billy @ TS Auto Design for sending in a couple customer vehicles they recently completed. First up is this BMW 328i (E90) on WORK Schwert SC1 in Black Polish (BP) Finish. Sizing is a 19×8.5 F & 19×9.0 R.

Next up is this BMW 335i (E92) on WORK Varianza T1S in Matte Diamond Black (MDB) Finish. Sizing is a 19×8.5 F & 19×10.0 R.

Last but not least, this Mitsubishi Evolution X on WORK Emotion 11R in Matte Black (MBL) Finish. Sizing is an 18×9.5 +20 all around.

(Source: TS Auto Design)

David September 3, 2010

Thanks to Jon L. for sending in his Nissan 350Z (Z33) on WORK Schwert SC4 in Crystal Silver (CS) Finish. Sizing is an 18×9.0 +4 (R-Disk) F & 18×10.0 -5 (O-Disk) R, with a 215/40/18 F & 235/40/18 R.

Thanks to Alexander H. for sending in pics of his Infiniti G35 Coupe.

Wheels are WORK Schwert SC1 in Black Polish (BP) Finish with Step Rim.

(Source: G35Driver)

Came across the site NIGHT:IMPORTS, which features many vehicles, especially ones on WORK Wheels. First up is this Lexus IS250 on WORK Schwert SC2 in Black Polish (BP) Finish with Step Rim. Sizing is a 19×9.0 F & 19×10.0 R, with a 215/35/19 F & 235/35/19 R.

Also covered was this Acura TL on WORK Varianza T1S in Machine Silver Polish (MSP) Finish.  In the same feature, another TL also has a set of discontinued WORK Equip 5 Spoke wheels.

Last but not least is this aggressive Scion tC, which has a set of classic WORK VS-XX in Extreme Gold (XG) Finish. Sizing is an 18×10.0 +23 (A-Disk) F & 18×10.0 +23 (O-Disk) R, with a 225/35/18 all around.

(Source: NIGHT:IMPORTS #1, #2, #3)

Thanks to Peter C. for sending in this snap of his Lexus IS250 AWD on WORK Schwert SC1 in Black Polish (BP) Finish with Step Rim. Sizing is a 19×9.0 +40 (R-Disk) F & 19×9.0 +34 (O-Disk) R. By running a big caliper disk in front and low disk in rear, he was able to achieve the stagger look but maintain the same width for his AWD setup.

Thanks to Joseph A. for sending in pics of his Mazdaspeed 3 with WORK Schwert SC4 in Black Polish (BP) Finish.

The sizing he is running is an 18×8.5 all around.

While on Club Lexus, I came across this Lexus IS350 (owned by username “Signal_jp”) on WORK Schwert SC1 in Burning Black (BKB) Finish with Step Rim, as shot by Hellaflush.

Sizing is a 19×9.0 +11 (R-Disk) F & 19×10.0 +13 (O-Disk) R, with a 215/35/19 F & 235/35/19 R.

Thanks to Kevin S. for sending in pics of his Honda S2000 on WORK Schwert SC2 in Black Polish (BP) Finish.

Sizing is an 18×8.0 +56 F & 18×9.0 +62 R, with a 215/40/18 F & 235/35/18 R.

ls460_sc1_sr_msp Came across Megan Racing’s project Lexus LS460. Wheels are WORK Schwert SC1 in Machine Silver Polish (MSP) Finish with Step Rim. Sizing is a 21×9.0 (R-Disk) F & 21×10.5 (O-Disk) R.

(Source: Megan Racing)