I Put In WORK . com

Thanks to Denis A. for sending in his Subaru WRX on WORK VS-XX in custom polished finish. Sizing is an 18×11.5 +7 with 295/30/18.

(Photo by Justin Chapman Photography)

Thanks to Jowell M. for sending in his Honda Accord on WORK VS-XX 18″ which were custom polished. Sizing is an 18×10.0 +26 F & 18×10.0 +21 R, with a 215/40/18 all around.

(Photo by Colin Kagel for Grip-Set.com)

Along with many new wheels launching in 2014, we are also focusing on additions to our existing models. This is the case with the brand new WORK VS-XX Step Rim, which has two main differences between the standard model.

1) Step Rim Barrel: Typically, the VS-XX has been offered using a Full Reverse barrel, which has a flat lip that extends to the edge of the barrel. This VS-XX Step Rim model uses a Step Rim barrel, which has a “step” in the lip to the edge of the barrel. In order to achieve this, a new center disk (with smaller diameter) was designed to properly adapt to the new barrel design.

2) Larger Big Brake Caliper Clearance: In recent years, vehicle manufacturers have equipped vehicles from the factory with large brake setups. In addition, aftermarket brake manufacturers have also increased sizing of their brake applications. As a result, WORK Wheels has added additional center disks that offer more brake clearance to clear both factory and aftermarket big brake setups. Please note that brake clearance must be verified with WORK Wheels USA, as clearance is not a given.

Due to its three piece modular construction, you can choose from a range of provided offsets, allowing for varying wheel fitment for different vehicles. Standard center disk finishes include Burning Silver (BS) and Gold (GLD) Finish. Sizing comes in 19″ and 20″, with widths from 7.5″ up to 12.5″ wide. The wheel comes standard with anodized polished barrels. Standard bolt patterns are 5×100 & 5×114.3, but can be done custom in 5×98 through 5×120.65. Wheels are custom built to order in Japan, using the latest low pressure casting and barrel forming technology.

In order to demonstrate these new additions, WORK Wheels USA installed various configurations of the WORK VS-XX on a Nissan GT-R (R35), Nissan 370Z (Z34), and Mitsubishi Evo X (CZ4A). All vehicles come standard with big brake calipers from the factory, and we were able to clear them without the use of spacers.

First is Saul B’s Nissan GT-R (R35) on WORK VS-XX Step Rim in Burning Black (BKB) Finish. Sizing is a 20×10.0 front & 20×11.5 rear.

Second is the Nissan 370Z Nismo Edition, which is on WORK VS-XX Step Rim in Burning Silver (BS) Finish with optional Hairline Barrel Finish.

Sizing is a 20×9.5 front & 20×11.0 rear.

Last but not least is a Mitsubishi Evolution X on WORK VS-XX in Gold (GLD) Finish. While this is not a step rim, this demonstrates our ability to clear the large OEM Brembo calipers with no spacers.

Sizing is an 18×10.0 all around.

For more photos from the shoot, please click here for the WORK Wheels USA Flickr Photostream.

Thanks to Overboosphotos for shooting Jose T’s Subaru WRX on WORK VS-XX in Burning Black (BKB) Finish, shown with optional WORK “W” center caps.

(Photo by Overboosphotos)

Thanks to Jack N. for sending in his Nissan 240sx (S13) on WORK VS-KF (discontinued) in Burning Black (BKB) Finish. Sizing is a 18×9.5 +7 F & 18×11.0 +20 (effective +12 with spacer) R, with a 225/40/18 F & 265/35/18 R.

In addition, he also has another Nissan 240sx on WORK Emotion CR Kai in Matte Bronze (MHG) Finish. Sizing is a 17×9.0 +17 F & 18×9.5 +12 R, with a 225/45/17 F & 245/40/18 R.

His friend Ryan E. also has a Nissan 240sx (S14) on WORK Meister S1 3P in Bright Buff Finish (BBF) with optional gold assembly bolts. Sizing is 18×9.0 +7 F & 18×10.0 +5 R, with a 225/40/18 F & 255/35/18 R.

(Photos by Boost Infested)

Logan October 31, 2013

Thanks to Nick D. for sending in his BMW M3 (E46) on WORK VS-XX in White (WHT) Finish, which he had custom rebarreled to a step rim. Sizing is an effective 18×10.0 +20 F & 18×11.0 +12 R.

Logan October 24, 2013

Thanks to Marc N. for sending in photos of his Nissan 240sx (S13) on WORK VS-XX in Gold (GLD) Finish.

(Photo by David Mojica for Canibeat.com)

Thanks to Connor M. for the heads up on this video of Jonathan P.R. & Matthew P.R.’s Honda Civic on WORK VS-XX in Gold (GLD) Finish.

(Video by HR Photography & Films)

Thanks to Craig H. for sending in his Hyundai Genesis Coupe on WORK VS-XX in Matte Gunmetal (MGM) Finish.

(Photo by MelYiMelon Photography)

Thanks to Masi for sending in his BMW M3 (E46) on WORK VS-XX in Burning Silver (BS) Finish. Sizing is a 19×9.0 +26 (A-Disk) F & 19×10.0 +23 (O-Disk) R with a 255/30/19 F & 285/30/19 R.

(Photo by Masi Abd)